For GEODI classifier OWA installation, you have to download Manifest.xml file with the method stated below and then forward it to Exchange Admin.

Minimum Setup requirements

  1. This extension can be installed on the Outlook Web App , Exchange On-Premises, or Exchange Online.

  2. The OWA server must access the GEODI server, (The mail server requires SSL for GEODI Url)

    1. For Exchange Online GEODI Url must be public.

  3. The user name and password for the token should not be changed. Otherwise, you will have to repeat the installation.

Creating Manifest File

  1. Create the Manifest → You can download the .xml file with “Download Manifest” button in the setup tab.

  2. Load the manifest → Use Add-In upload in Microsoft 365 Admin Center/Built-In Apps for all defined users or desired ones.

  3. After this process, the system will start distribution. Deployment may take 3-24 hours.

ingilizce manifest sayfası.pngIntegratedApps2_modified.png

Troubleshooting

  1. Your policy settings may be so, change the settings

  2. For On-Prem Exchange environment: This is an issue that must be solved in Microsoft side. You should take the actions in the link below. It should work afterwards. You don’t have to re-create the manifest file.

https://learn.microsoft.com/en-us/office/dev/add-ins/outlook/outlook-on-send-addins?tabs=classic#install-outlook-add-ins-that-use-on-send

There may be several reasons.

  1. Is the GEODI server running?

  2. Before creating the manifest file, make sure the GEODI URL address in the UI is correct. Otherwise, repeat the installation.

  3. Microsoft OWA servers must see the GEODI server. If you are using Exchange Online, the GEODI address must be public.

  4. SSL must have been defined for the GEODI address. Be sure that SSL is defined and that it is not expired.

  1. Is the GEODI server running?

  2. Is the project that is used to create the manifest file still active? If not, revert the project or re-create it. In case of re-creation, the manifest process must be repeated.

  3. Is the TokenUser and its password still valid? If not, the manifest process must be repeated.

  1. No, all changes applied automatically.

  2. Manifest reload is required in cases like GEODI Url or Tokenuser changes.

  1. Yes, It can be done for testing or other requirements. Create multiple projects and manifest files for each.