On this page, you will find the Setup setup link, requirements, settings and the path you will steps to follow for the commissioning phasesdeployment.
Privacy Issues
GEODI is designed to make it easier for you to access and explore your data repository. To do this, it needs access to the data. You can find your questions about the security and privacy of your data during the setup stages at GEODI Gizlilik Konuları
...
Subject
...
Description
...
Preparation Before Setup
...
Please first review the hardware and network requirements for GEODI to work properly on the Sistem Gereksinimleri: GEODI page and please fill out the attached checklist before starting the setup. You can also fill in the checklist together with the DECE Support Team.
The system requirements page also shows the topology of GEODI and other components. We recommend you review it before you start.
| Attachments | ||
|---|---|---|
|
...
GEODI Setup
...
After running the setup, GEODI starts in default mode and automatically opens a tab in the browser. You can then access the administration and query interface by right-clicking on GEODI in the System Bar/System-Tray. Windows service or IIS service setups can be activated later.
GEODI'nin Varsayılan Modda Kurulumu
Please consult for non-internet environments.
...
License Activation
...
Prior to setup, you must specify an email address to which the License will be linked and provide it to DECE sales or technical teams. When your license is created, you will receive an email with the license key.
...
| Table of Contents | ||
|---|---|---|
|
Installation
| Info |
|---|
Download the setup and run.
The installation will prompt for your license code, and with a valid license code, the modules included in your license will be installed automatically
...
.
...
Setup of Modules
...
After activating your license, the modules will be downloaded and installed automatically. You should make settings after setup. For modules not included in these pages, please ask for support from DECE teams.
...
Public Address / SSL Identification
...
A public address is needed for users to access the GEODI server. An SSL-certified FQDN is recommended for secure access. Our users use addresses like geodi.yourdomain.com or arabul.yourdomain.com. After the public address definition and SSL certificate setup on the server is done by the relevant institution / company team, GEODI Configuration should be done as follows.
For SystemSettings.json setting https://decesw.atlassian.net/wiki/spaces/SDS/pages/3955917555#Sistem-Yap%C4%B1land%C4%B1rma-ve-G%C3%BCvenlik-Ayarlar%C4%B1
| Code Block |
|---|
"SSLLocalCertificateSerial":"<Sertifika serial no>" |
...
System Configuration / Security Settings
...
Authorizations and LDAP settings
...
Procedures should be taken to create users and determine authorizations and groups.
GEODI Kullanıcı/Yetki Yönetimi
...
GEODI Windows Service Setup
...
Windows service setup is optional after default mode. All settings you created in default mode are valid.
GEODI'nin Windows Servis Olarak Kurulumu
...
Backup and Redundancy
...
Only index backup and/or redundant operation is possible.
GEODI Index Yedeklenmesi ve Yedekten Kurtarma
GEODI Aktif-Pasif ve Aktif-Aktif konfigürasyonu
...
Creating the Project, Connecting Resources
...
In order to perform operations such as indexing, data discovery and classification in GEODI, a Project must first be created. Resources, authorizations and rules are defined on the project wizard.
Kaynak:Veritabanı Veri Kaynağı
Kaynak:Bulut Sunucular, FTP, SharePoint
It is possible to customize some appearance and content in the GEODI user interface. You can remove and add GEODI data display options (Content, Map Calendar...) and it is also possible to use different looking themes.
...
If OCR License is available
...
OCR takes a long time and consumes a lot of CPU resources. We therefore recommend that you take some considerations into account when applying it to large data.
GEODI OCR Engine OCRs scanned documents in default mode and presents them with GEODI. You can search and find scanned documents.
Optionally, it can also output scanned pages as SPDF (Searchable PDF). The SPDF option can extend the time from x3 to x5 compared to the default mode. It also requires additional disk space for SPDF files.
GEODI OCR can also OCR very large scanned images such as A0, A1 maps. This option is turned off in default mode.
If you have a GEODI 360 license, you can also OCR videos. In this case you have to allocate much higher CPU resources.
...
If Corporate Search License is available
...
Having an Enterprise Search license technically means that there will be more users. In order to provide uninterrupted service to users, FKM and index backup procedures should be operated in addition to the server being sufficient.
In order for Institutional Search to be effective, it is recommended that data is presented in a single project and authorizations are organized appropriately.
Different units have different data access needs. GEODI Enterprise Search solution provides access to all of them from a single platform. Separate training should be planned for each unit when necessary. DECE teams will support you at all stages.
For trainings : GEODI Eğitimleri
...
If Data Discovery License is Available
...
You will connect a large number of sources for data discovery. If enterprise search is not included, it will be available to a limited number of users. Depending on your purpose (Institutional sensitive data discovery Finance, PCI/DSS GDPR), the selection of sources and recognizers determines the success of the result.
The discovery panel will provide information about the results from the first moment of indexing. This panel should be shared live and/or as a PDF with corporate officials and managers from the first moment and opinions should be taken.
The discovery panel will show the misplaced data (i.e. risks and incompatibilities). According to the results of this panel, you can carry out Destruction and Quarantine procedures after Indexing.
...
If Geographic Archive License is Available
...
The Geo Archive application is technically a use case of GEODI Enterprise Search. System requirements, authorization and other considerations apply.
For a municipality, road administration or an organization that produces geographic data, it is recommended to have at least one of the Parcel Recognizer, Kilometer Recognizer or GeoArchive modules. DECE team will provide the necessary support for the setup of these modules.
...
If GDE License is Available
...
The GEODI endpoint or PC discovery tool is called GEODI Desktop Explorer, or GDE for short. GDE can be installed on multiple PCs and enables indexing and data discovery of selected directories and file types on the endpoint. With GDE, you can also ensure that files on PCs are backed up in a centralized area.
You can find all the necessary steps for GDE setup and deployment of agents to the endpoints on the following page.
GEODI Desktop Explorer(GDE) Kurulumu
...
If Classification License is available
...
GEODI Classification solution consists of several components. You can find all the necessary steps for setup and deployment of agents on the following pages.
GEODI Desktop ve Office Classifier Kurulum ve Konfigürasyonu
GEODI OWA Classifier Kurulum ve Konfigürasyonu
...
Frequently Asked Questions
...
We have answered the problems and solutions you may encounter during setup or other processes as much as possible on the attached page. DECE teams will provide support for the answers you cannot find.
System Configuration and Security Settings
Configuration settings can be edited by creating a SystemSettings.json file in C:\Program Files\Dece Software\GEODI\ içerisinde SystemSettings.json. The most commonly used settings are here. Please refer to Sistem Yapılandırma - Güvenlik Ayarları for all settings.
...
Setting Name
...
Type
...
Default
Value
...
Category
...
Description
...
AppDataFolder
...
String
...
null
...
System
...
This is the path the application will use for Project, Log, Default Index, Dictionaries and All metadata.
AppData location is used for null and empty values.
...
AppPort
...
int
...
3323
...
WebServer
...
It is used to determine the port to be used by the WebServer launched via GEODI.exe.
If it is set to 80, there is no need to write a port on the client side. IIf SSLCertificate is set, there is no need to write a port on the client side when using SSL port 443.
...
SSLLocalCertificateSerial
...
String
...
null
...
WebServer
...
Used to activate SSL with a valid certificate installed under Computer Certifcates/Personal. It is an alternative to specifying a certificate file with SSLCertificate.
...
ShowWebExceptionStackTracebool
...
bool
...
false
...
WebServerSecurity
...
Allows error details to be displayed in case of Web request errors. By default, details are not displayed.
...
LogExceptionStackTrace
...
bool
...
false
...
System
...
Provides logging of additional details of Scan and System initialization errors.
Related Pages
...
After GEODI is installed, the GEODI management interface will be accessible in your browser at http://127.0.0.1:3323/manager.
The GEODI server should be accessible to clients running the agents, if any. For this purpose, DNS and SSL configurations should be made.
You should create a Windows Service for continuous operation. GEODI Setup as a Windows Service
Congratulations. You have successfully installed the GEODI. Now it is time to download templates from DECE-STORE that are ready for your needs(GDPR, Classification, and more).
| Info |
|---|
The Frequently Asked Questions page provides issues and solutions you might encounter during installation or other processes. |
| Note |
|---|
UpdateWe constantly update the software because we value quality and user experience. For a GEODI update, running the "update.bat" command that comes with the installation as an administrator is sufficient. You run the command and leave it. All necessary operations will be performed on a running system. GEODI modules get updates more frequently than the main GEODI version. To update only modules you may run UpdateModules.bat çalıştırabilirsiniz. |
GEODI AppDataFolder
GEODI stores workspace definitions, indexes, logs, and other data in the %appdata% folder, which is created automatically during installation.
You need to set up a new folder if the install and Windows service users are different. Otherwise, the service cannot access the license and other information.
Change the AppDataFolder value in the SystemSettings.json file.
https://decesw.atlassian.net/wiki/x/RofcUg
You may use this method if there is insufficient space in the default %appdata% folders.
GEODI must be closed during these changes.
If there are previous %appdata% folders, you may MOVE them to the new location. After MOVE, you should also change the folders' read/write permissions for Windows service users' access.
This action will ensure that the license and other settings remain intact.
Defining SSL
For Classification and Agent PC Discovery projects, the GEODI address must be secure and accessible to clients. You must make the following settings in GEODI for the SSL Certificate. For details, refer to the page. Definitions must be made before agent deployments.
SSL definitions are made in the SystemSettings.json file in the GEODI installation directory.
| Info |
|---|
"AppPort":443, |
| Tip |
|---|
To obtain the certificate serial number: Open the Manage User Certificates application. You can get the Certificate Serial Number from the properties/details tab of the relevant certificate under the Personal tree. If you have a *pfx file, you must first install it by double-clicking on the file. |
| Note |
|---|
Load Balancer Case: In cases where certificates are managed with a load balancer, you do not need to make any additional definitions on the GEODI side. |
Offline Installation
GEODI downloads the modules from DECE-STORE by default. You should change the update address if the server cannot access DECE-STORE.
DECE teams will provide
*.GeodiModuleXfiles, and you should put them in the<geodifolder>/LocalDECESTOREfolder. DECE teams will update you with new files when they are available.Then, the
ModuleStoreFoldervalue inSystemSettings.jsonshould be set to<geodifolder>/LocalDECESTORE.
The new GEODI setup can be downloaded and installed as usual.
License Update
Run LicenseUpdate.bat to open the dialog.
If you need to move the GEODI to another machine, you should deactivate the license and then reactivate it on the new machine.
You should also apply the new license keys on the same dialog.
You do not need to stop the service.